I have removed the front two bolts but the back ones are the trouble. They are almost impossible to see.
I assume that this Snap on tool is a 1/4 drive on one end and a 3/8 drive on the other so you stick a 3/8 hex hey socket on the end and break em loose that way? Please expalin further?
This is not looking like fun. It looks like I will have to buy 60-70 dollars in tools for 2 bolts and then I can see it is best to replace 6mm bolts with new ones when doing this job. Is replacing the hex key bolts with 13 MM bolts a good option or just setting up the next guy in there with problems?
92 500E 90K miles stock less AMG chip
73 Datsun 240Z, 74 260Z, and a 75 280Z 2+2