View Single Post
  #4  
Old 08-02-2002, 06:02 AM
Brian16V
Guest
 
Posts: n/a
Just replaced my hood pad about a week ago. It's a pretty easy proposition. If you removed yours and left it off, the "bare" underside of the hood will look pretty ugly (you'll never get all the residual adhesive off). OEM replacement hood pads and the 3M adhesive will run about $80.00 from www.************************. Make sure you drape your engine compartment with plastic or tarp when scraping off the old pad. I put sawhorses on either side of the engine bay and ran some boards across 'em. This made it real convenient for R&Ring the pad -- I would say it's a necessity for proper pad alignment.

Good luck!

Brian16V
Reply With Quote