View Single Post
  #5  
Old 07-03-2010, 08:00 PM
Jer Jer is offline
Jer
 
Join Date: Sep 2005
Location: Meriden, CT
Posts: 82
You should read the values of the temperature sensors in the system through the diagnostic function of the pushbutton unit. Go to this link and read about it.

http://www.startekinfo.com/manual/volumes/cc/3_7/m12.jsp

Check the heater temp (#3) and evaporator temp (#5) and report back.

There is also a possibility that the refrigerant charge is low. But do the above test first and tell us what you get.
Reply With Quote