Thanks for your replies. You could be right on the excess amount of oil - which I can drain some or reduce with no problem at all. However, ever since I've been doing the oil changes (after the warranty expired), I've been putting in the same amount of oil all along. Every time I check the Dash on the oil level after each oil change, it always tells me Oil Level 'OK'. So, I always assumed the amount of oil I put in is correct. Besides, during the Dash info check, it will tell you if you have excess oil or requires additional oil to the engine - neither was the case. The user manual also tells you that there could be 'water' on the oil when you get this malfunction - which is very, very unlikely after having done the oil change only 2 weeks ago. Perhaps, my next move is to have diagnostic done to see if there are any error codes present. Additional responses/replies from our experienced members will be appreciated, especially from our experienced MB Techs out there.

__________________
Josemin


88 MB 300E
88 MB 560SEL
99 MB ML 430