View Single Post
Old 08-09-2002, 07:18 PM
RPM55 RPM55 is offline
Registered User
Join Date: Jun 2002
Location: Cumming Ga.
Posts: 238
The fan clutch removal is the same as on the earlier models its just more difficult to get the holding tool into the hole. The factory tool for doing this seems to be too short because the upper part of the tool hits on the coolant hose from the water pump to the front of the head. I made a tool to do this job using a long paint roller by cutting and bending to match the holding portion of the factory tool.
Reply With Quote