View Single Post
  #1  
Old 08-11-2002, 12:16 PM
Kyle Blackmore's Avatar
Kyle Blackmore Kyle Blackmore is offline
Mostly Harmless
 
Join Date: Sep 2001
Location: almost beyond Hope...B.C.
Posts: 897
Question 300CE window regulator

My driver's side window won't roll up to the top anymore.I removed the door panel and could see the last 3 teeth are broken off.(it was making a noise before).I checked on fastlane's catalog and the regulator is available w/o the lift motor.
My question is do I need to remove the 3 rivets or does it just unbolt?The CD is a little confusing as it has two different procedures-#180 removal and installation of window lift (power window) on drivers door-describes unbolting.
#185 removal and installation of electric window lift on drivers door-describes drilling out rivets and unbolting.
Is it the lift motor that is riveted in place?
Could new teeth be welded and ground to shape?
Any help would be appreciated
__________________
1985 380SE- 160,000km 'Blistu' - Sold
1988 300CE- Eva,my garage mistress
2007 R350 4matic- The Black Pearl
2011 Ford Ranger-Work truck
1974 25' Trojan Sea Raider- 'Grannyknot'
2002 215 cm Atomic DH skis- Canadian SDH record holder, 175.5km/h- Vars 2010
Reply With Quote