Quote:
Originally Posted by LandYaghtLover
Well I alread ordered the part from Napa. I wonder if it requires welding too. It came with a bunch of nuts and such. I was expecting something more like what you linked above but with securing bolt similar to what is used for the tie rod end links (minus threads).
The kit will be here Friday. Also I have no way of welding, but maybe I will look into getting this kit since I know 100% for sure it works and see if I can get a welder to stop by.
What a headache and I have only had the car two days!
|
Usually there will be a couple washers and a bolt, you'll need to get a look at things and see if your need the rubber bushings that fit alongside the upper control arm. They may have gotten loose and lost when things came apart!
As far as welding I cant imagine anything attaching secure and strong enough by other methods, the good thing is you should call around to the welders in your area, most will have a mobile welding truck/trailer setup and you can probably get the repair part stuck into place in about 20 minutes for less than $100 bill!