View Single Post
  #7  
Old 09-02-2010, 09:28 PM
panZZer panZZer is offline
Banned
 
Join Date: Aug 2008
Location: Texafornia
Posts: 5,493
You need a longer bolt to pull it thru the wheel /rotor hub--no luck finding some bolt like this at homo depot/lowes but--
Your spare tire hold down bolt works fine for this job, just get a 2.5 inch piece of cast pipe/etc - place the big hold down washer against the pipe and then thread into the axle end and tighten to pull it in enough to use the stock bolt!
Reply With Quote