View Single Post
  #6  
Old 09-06-2010, 02:43 PM
compress ignite's Avatar
compress ignite compress ignite is offline
Drone aspiring to Serfdom
 
Join Date: Feb 2004
Location: 32(degrees) North by 81(degrees) West
Posts: 5,554
Tq Wrench and Ramps

Beam Type
(OOh! On Sale ,save $3.00 USD...'Wonder how much it was marked up? First.)

'Looks like it comes with a 3/8 to 1/2 adapter.

http://www.sears.com/shc/s/p_10153_12605_00944978000P?prdNo=3&blockNo=3&blockType=G3

[Had one for 15 years...If it were to be "Mal-Adjusted",you only need to bend
the pointer back straight (so it points to ZERO, at rest).Almost Foolproof]

I'm enamored of the Rhino Ramps(Composite Plastico,Lightweight)
[Get the 12,000 Lbs version]
Howeveah,The Rubber anti-skid plates on the bottom MUST be intact!
ALSO,A Good set of RUBBER wheel chocks are necessary for safety.

Mr. Obsessive
(I hate having to dial the cellphone whilst 3,000Lbs of auto constricts my
diaphragm,even if I get the 911 operator on the cell I can't move enough
air to Speak.)
ALSO uses "Failsafe" 12X12" (Double Stacked @ 90 degrees) Timbers,If
whatever' s supporting the chassis (Or a Seismic event occurs) FAILS I
still get another shot at completing the attempted repair.
Attached Thumbnails
5-30 Nm torque wrench and ramps question-screenhunter_01-sep.-06-14.26.gif   5-30 Nm torque wrench and ramps question-screenhunter_02-sep.-06-14.42.jpg  
__________________
'84 300SD sold
124.128
Reply With Quote