View Single Post
  #4  
Old 09-15-2010, 12:52 PM
jhodg5ck's Avatar
jhodg5ck jhodg5ck is offline
Registered User
 
Join Date: Feb 2004
Location: Atlanta, GA
Posts: 1,395
wires are pretty reasonable on the aftermarket... @ this point I've been seeing a lot of spent ends and the wires themselves are getting hard w/ all the Heat the 119's throw.

The key to doing the wires is lay them out and number them before hand.. when it comes to placement on the caps keep one of your old caps free to check placement.

In the plastic guides/holders you'll find very small #'s telling you orientation of each wire.

Take your time, spend more time on prep, write down the above #'s so you can readily access while installing and it will go OK!

JOno
__________________
Blue Ridge Mercedes
Jonathan Hodgman
http://www.blueridgemb.com/
Enthusiast Service, Restoration & Tuning.
Follow Us on Facebook!
Located in the Atlanta area
Specializing in all pre and post merger AMG's including Hammers and DOHC M117 engines.
Mercedes Repair Atlanta
Reply With Quote