The thing about it that no one seems to get is that BOTH SIDES in the front have nothing coming out. I took both front wheel bleed screws out and getting zero fluid out of both sides. Neither side is giving me even drips.

Which makes me wonder if there is something wrong with how I put the res on the MC. Could the rubber seals that go on the two feet/holes that feed the fluid into the MC be the problem? The holes into the MC are very small and located at the sides of the well. Could the seal be blocking the hole to the front wheels?

I put the seals in the MC and then snapped the res onto the MC. Should I have put the seals on the res and then put the res on the MC?

__________________
Ginny in Denver-ish
78 300SD, 265K (mine)