View Single Post
  #1  
Old 11-08-2010, 04:51 PM
gottofixit gottofixit is offline
Registered User
 
Join Date: Nov 2010
Location: Clearwater fl
Posts: 3
78 300sd brake pedal going to floor after master cylinder replace and bled

I have a 1978 300sd with brake issues. The pedal slowly goes to the floor when the engine is running but not when off. I have replaced the master cylinder twice, both rebuilt form auto parts store, and bled the system from the brake cylinders. I have checked the vac at the pump and get 25inHg. The booster is holding vacuum also. I have looked for fluid leaks and find non. Now i am at a loss. Could air in the system cause this?
Reply With Quote