hard cracked insulation
1. Hey guys he said the switch was replaced remember…
2. It could be your wiring; your car is still young but never know. When the wire insulation gets old they gets hard, every time you open and close the doors the wire is bending back and fourth like it’s designed to do. But when the insulation is hard it can brake, now picture the wire bending at a sharp angle, in time the wire will severed.
3. To confirm this take the switch out and jump the points one way for back and the other way to go forward. Fine the fault one and ohm it out. You don’t need to replace the whole harness just between the broken one with another wire and a crimp kit set.
Thai GI sends…
GI but not GI Joe
They call me "The Thai GI"
Thai in the US Arsenal