View Single Post
  #4  
Old 08-27-2002, 08:45 PM
engatwork's Avatar
engatwork engatwork is offline
busy
 
Join Date: May 2000
Location: Soperton, Ga. USA
Posts: 11,772
I did not mean replace the bearings but you will want to "service" and inspect them while they are out. Clean an repack them prior to assembly. Also, if memory serves me - the torque for the rotor to the hug is higher than 30-35 ft-lbs. Sorry, don't remember the exact number and I don't have the manual anymore.
__________________
Jim
Reply With Quote