Quote:
Originally Posted by Rebe
Thanks for the information on the mounting of the tester! I got it put together & tested it. With the ignition on position 1&3 for the 201 I got a single flash. Looking at the code list it saying no trouble. I would have thought it would have some bad boys stored from previous issues? I tested with ignition switch in on position. It showed on or in the engine run idle speed. I presumed from reading it either one is acceptable for testing??
|
Just for kicks, you might want to unplug your Engine Coolant Temperature Sensor, start the engine, after minute or two turn it off. Plug it back in, then do the LED test again to see if you get 3 flashes. If you do, then clear it...that way you'll know you are storing DTC's and your tester is working.