Quote:
Originally Posted by patr1707
Thanks for the replies,
Heres whats going on:
I already have the transmission bolted on tight to the bell housing, but I was stupid and didn't line up the bolts. 
So I was able to rotate the TC a little using a screw driver and turning the engine over, but it has not gotten caught on something, most likely the raised bolt holes....
I already have everything on the transmission hooked up and I cannot loosen the top bell housing bolts with out dropping the transmission a little.
I hope I didn't mess anything up in there.
Should I undo everything and try to loosen the bell housing? |
im not sure but sometimes the trans have a plug or something sticking out that needs to line up with a hole in the flex plate. I wish I knoew more about MB autos but I yanked mine out for a std. somebody will chime in, I would wait until you have a definative answer
__________________
1982 300CD Turbo ( Otis, "ups & downs") parts for sale
2003 TJ with Hemi (to go anywhere, quickly) sold
2001 Excursion Powerstroke (to go dependably)
1970 Mustang 428SCJ (to go fast)
1962 Corvette LS1 (to go in style)
2001 Schwinn Grape Krate 10spd (if all else fails)
|