View Single Post
Old 09-17-2002, 12:41 PM
speedybenz speedybenz is offline
Registered User
Join Date: Jan 2002
Location: Sacramento, CA
Posts: 132

If you can get the In. and Ex. cam opening and closing points at 0.040" lift (std) the cam duration and lift I could tell you something.

To get more info I need the intake port volume and both intake and exhaust valve sizes.

Also if you know what the piston to head clearance is. And the head gasket is it one, or three pieces and steel. This clearance should be set at 0.035"-0.040" max. Any more and your losing Hp. And leave yourself open to detonation.

If you could send pics of the ports and combustion chamber that would really help

Reply With Quote