Quote:
Originally Posted by kickit
Shoot, now I'm confused. I cleared out some fuel that was in the well (return lines were leaking and will be replaced) and it looks like I have the Splined retaining ring.
The thing is I took a cheap 22mm socket and cut off the head so that only the 22mm socket portion was left and it does not even fit over the injector holder head.
I'll get a 27mm socket and see if it fits.
Thanks again.
|
Let me know if I was wrong. I am going by the bits and pieces I have picked up on the forum concerning other models besides my own.
Below are slotted Prechamber Retaining Rings
__________________
84 300D, 82 Volvo 244Gl Diesel
Last edited by Diesel911; 05-08-2011 at 11:10 PM.
|