Well as I'm pulling the carrier to do the rear wheel bearing I see my lower drivers side control arm has a rust hole in it. And the whole subframe is surface rusty, but I do not see any more holes. My subframe mounts are toast, so I think I may as well go ahead and do the subframe mounts, and POR15 some stuff while I am in there.
My plan was to do the Sportline rear subframe mounts, I did some extensive looking around a long time ago and I have the part number
2023503408
saved, its available from most parts places for around $60 for the pair. From the dealer this p/n is $77.22 each.
However Benzworld is saying 202-351-09-42 is the sportline rear number from the dealer this is $26 each.
But looking at the picture they look the same, taller than the original W124 mounts and include new plates and longer bolts.
the 351 mounts
http://users.zhonka.net/zeitgeist/300TD%20Mods/Suspension/Sportline%20sub-bush%20retainer%20top.jpg
the 350 mounts
http://www.autocarspare.com/catalog/suspension-bushing-kit/2023503408.html
Do both work?
Also, for the "sportline" conversion are the forward mounts standard, or is there a sportline version of that as well? I'm trying to sort though all of these pages I stored on firefox.