[QUOTE=thorsen;2723282]Your picture is hard to understand, but why do you have the resistors in-line with the compressor? The AC compressor only needs +12 volts to kick in the clutch - aren't those the resistors for the cabin fan?[/QUOTE

I put the pic of the resistors on the schematic to show that the resistor labled A clatters when I touch the test light to the hot wire that is showing lesser voltage, by not lighting my test light up fully. The black line running from the left to the right and up to the resistor box only passes under the box to another junction of wires between the firewall and the resistor box, from there it splits and comes back to resistor A, B and C. Sorry for the pic quality if it will help I will try and make it better but hard to do when using (Paint / bitmap)

__________________
Collector of Fine Hose Clamps
'77 240D 'AVA' is in heaven now
'80 240D Kanarienvogel
'82 300TD 343k was my daily driver 'ADOLPH' In Surgery for a severe Deer Bite to the Nose
'88 560SL 102k 'White One'