Gilly,

I could not locate any repair parts for this regulator, it appears I'll have to replace. I did find several posts from a different board making reference to slightly modifying a 124 (??) slider and installing it, but not sure it is suitable for this application. The only replacement/repair parts I did find where a complete regulator with motor.

Nulu,

This car is black on black so all of the panels and parts are, well, black. I didn't notice any brackets that stood out different. It might be the upper inside portion you are refering to, that might be where I saw the torx or allen screws. I will have to gut that side again when I get time and take a second look. There was definitely no way the regulator would come out the tiny access hole at the bottom on the panel .

__________________
Mike Tangas
'73 280SEL 4.5 (9/72)- RIP
Only 8,173 units built from 5/71 thru 11/72

'02 CLK320 Cabriolet - wifey's mid-life crisis

2012 VW Jetta Sportwagon TDI...at least its a diesel

Non illegitemae carborundum.