View Single Post
  #1  
Old 07-03-2011, 10:01 AM
wally wally is offline
Registered User
 
Join Date: Aug 2004
Posts: 13
w124 window won't roll up

Driver side front window stops about 5-6mm from the top, just inside the window seal. It startled me at first because I heard a loud popping/cracking sound all of a sudden, I assume this is a mechanism to protect the gear teeth not the teeth being torn to bits each time I roll up the window?

I checked threads and the door itself looks ok, nothing in the track that I can see to obstruct it. So, does this mean my regulator is bent/broken and will not allow the window to go fully up? Or maybe it is can be tightened up or adjusted? The window is not loose, there is only a little bit of play when it is rolled down.

I'd like your opinion before I take the door apart; this is old car and I risk breaking some plastic bit taking the door off (I was lucky the first time, when replacing the door check).

-----------------------
'94 E420, 275,000 miles

Last edited by wally; 07-03-2011 at 10:12 AM.
Reply With Quote