If you are getting 0 volts to the glowplugs in the start position, something is wrong. To manually heat the glowplugs, remove the glowplug harness plug from the relay, twist together 5 pieces of solid copper wire, putting the 5 ends in the plug harness connector, then run a heavy jumper wire from the positive post on the battery to the 5 twisted together wires. This will energize the plugs.
__________________
1977 300d 70k--sold 08
1985 300TD 185k+
1984 307d 126k--sold 8/03
1985 409d 65k--sold 06
1984 300SD 315k--daughter's car
1979 300SD 122k--sold 2/11
1999 Fuso FG Expedition Camper
1993 GMC Sierra 6.5 TD 4x4
1982 Bluebird Wanderlodge CAT 3208--Sold 2/13
|