View Single Post
  #3  
Old 10-06-2002, 07:28 PM
Ridge Ridge is offline
Registered User
 
Join Date: Mar 2002
Location: S.F. Bay Area
Posts: 502
Steering box

Before you go to the trouble of changing steering boxes, try adjusting it.

All you need to do is loosen the big lock nut on top of the box and then screw the set screw upwards to tighten up the steering.

Remember the screw must unscrew to tighten. Do it a half turn at a time and lock it down each time. Then take it around the block to test. If you tighten it too much, it won't return to center after you round a corner, so be careful!!!

Ben
www.reproduce100s.com
Reply With Quote