View Single Post
  #2  
Old 08-04-2011, 12:57 PM
boneheaddoctor's Avatar
boneheaddoctor boneheaddoctor is offline
Senior Benz fanatic
 
Join Date: May 2004
Location: Hells half acre (Great Falls, Virginia)
Posts: 16,007
You need a new schrader valve and yes...the system will HAVE to be evacuated before recharging because

#1 you need to get the air out....its non-condensing...and

#2 you NEED to get any moisture out.....

You really are supposed to replace the receiver dryer anytime the system is opened but that means you need new o-rings and need to replace that part of the oil.


However given the small size of the opening you can get the old one out and the new one in quickly enough you might get away with just evacuating and recharging.

Now there is a tool that will allow you to replace the shrader valve insert without losing the charge..if you know any HVAC guys...maybe for a few bucks you could get him to do it for you if they have one of those.

Legally, you have to have a recovery machine to suck the system dry before you do any work or you risk the enviro-nazis from coming over and doing unspeakable things to your nether regions. Because its illegal to vent refrigerant into the atmosphere.
__________________
Proud owner of ....
1971 280SE W108
1979 300SD W116
1983 300D W123
1975 Ironhead Sportster chopper
1987 GMC 3/4 ton 4X4 Diesel
1989 Honda Civic (Heavily modified)
---------------------
Section 609 MVAC Certified
---------------------
"He who fights with monsters might take care lest he thereby become a monster. And if you gaze for long into an abyss, the abyss gazes also into you." - Friedrich Nietzsche
Reply With Quote