View Single Post
Old 10-07-2002, 09:56 PM
Pilotx1 Pilotx1 is offline
Registered User
Join Date: Apr 2002
Location: NW suburb of Chicago
Posts: 104
Are you talking about the instrument lights? if so I had the problem of mine not lighting up at all. the fuse is good and bulbs are brand new and checked with a volt meter. I pulled out my cluster assembly and found a burned up circuit trace on the circuit board. The trace ran from the dimmer switch to the bulbs and thus no power was getting to the bulbs. I priced out a replacement cluster and it was expensive for me at least. I was able to fix it by carefully bridgine the burnt out trace with small guage wire and soldering. I didnt find it too terribly difficult but do consider myself good at soldering so if you dont think you can solder well enough find a friend who can theres nothign worse than causing more extensive damage to stuff like this because of a misplaced drip of solder or connection
190e 2.3L
107000 miles
Reply With Quote