View Single Post
  #6  
Old 08-17-2011, 09:18 AM
Stretch's Avatar
Stretch Stretch is offline
...like a shield of steel
 
Join Date: Sep 2009
Location: Somewhere in the Netherlands
Posts: 14,461
Mini update

I'm still getting the floor clear and I've got the blower motor / heater box out so I can get at the sound proofing on the bulkhead, and see how the floor pan is made.

The picture I posted above suggests that the floor pan comes in two parts - not so =>



And I forgot to show another bit where the car has been cut and shut. This time on the rear bulkhead bit under the rear seat...

Attached Thumbnails
My W123 saloon / sedan old accident repair (and a bit of rust repair) thread-w123-floor-shot-heater-gone.jpg   My W123 saloon / sedan old accident repair (and a bit of rust repair) thread-w123-cut-shut-aft-floor-section-too.jpg  
__________________
1992 W201 190E 1.8 171,000 km - Daily driver
1981 W123 300D ~ 100,000 miles / 160,000 km - project car stripped to the bone
1965 Land Rover Series 2a Station Wagon CIS recovery therapy!
1961 Volvo PV544 Bare metal rat rod-ish thing

I'm here to chat about cars and to help others - I'm not here "to always be right" like an internet warrior



Don't leave that there - I'll take it to bits!
Reply With Quote