Originally Posted by ewenjo

Okay... I tried the bent wire...couldn't dislodge the bushing.
I then made a tool with a small 1/16 tooth and that didn't work.
I then tried the .375 tap, it just didn't grab but it rotated the bushing.

So off I went to the hardware store a got a 5/16 o.d. expandable concrete stud about 3 inches long. It just fit in unexpanded and after i tightened it up snug.. I pulled and "viola" it came right out.

Now I have two very stubborn upper rail pins that are refusing to come out.....I "power blasted"(penetrating oil) them for the last three days and still can't budge them with the 6mm bolt and washer trick.... or with a makeshift impact hammer. What do you think about heating the the casing??