View Single Post
  #7  
Old 10-13-2002, 03:11 AM
Ridge Ridge is offline
Registered User
 
Join Date: Mar 2002
Location: S.F. Bay Area
Posts: 502
Steering box

herbct01,

If one full turn didn't work try another half turn or so. Unscrewing tightens the steering, not in!!!

It's quicker to pull the engine and tranny as a unit. Once the radiaote is out everything comes out pretty easy. Don't remove the power steering from the car, just tyake it off the engine and lay it to one side and wire it down so it can't move.

If the tranny that you're removing is n auto, put some modeling clay in the banjo bolt holes and screw them back into the tranny so it won't leak as you pull it out of the car.

Ben
Reply With Quote