View Single Post
  #7  
Old 09-27-2011, 08:14 PM
Diesel911's Avatar
Diesel911 Diesel911 is offline
Registered User
 
Join Date: Sep 2007
Location: Long Beach,CA
Posts: 25,156
If you use regular wrenches you may need to grind one thinner.
Hazet Valve Wrench Head thickness = 0.242 so 1/4 inch ought to work.
You might be able to find some wrenches that are already that thin. Also the wrenches do not need to be a high quality as the Nuts on the Valves are not tightend down hard.

If you know someone who has a Belt Sander it works better than an grinder to thin Wrenches.

If you remove the Fuel Injection Hard Lines you will need to know how to bleed the Air out of therm:
DIY Repair Links
DIY Links by Parts Category - PeachParts Mercedes ShopForum

PeachPartsWiki: Do It Yourself Articles - Mercedes Vehicles
__________________
84 300D, 82 Volvo 244Gl Diesel
Reply With Quote