View Single Post
  #12  
Old 10-21-2002, 07:47 PM
bobterry99 bobterry99 is offline
Registered User
 
Join Date: May 2001
Location: Las Vegas, Atlanta
Posts: 669
Dan, must have been another Bob! I've never had the opportunity to work for TCI.

Satern, Dan mentions something that might be critical. Try driving the car for 10 seconds and then attempt to erase the remaining codes and operate the top.

And hey. Here is the reference for all the soft top controller codes:

1 = No malfunctions stored.
2 = Limit switch - compartment cover not locked (left)
3 = Limit switch - compartment cover not locked (right)
4 = Limit switch - compartment cover not closed (left)
5 = Limit switch - compartment cover not closed (right)
6 = Limit switch - fabric bow not locked (left)
7 = Limit switch - fabric bow not locked (right)
8 = Limit switch - fabric bow not lowered (left)
9 = Limit switch - fabric bow not lowered (right)
10 = Limit switch - top not locked at windshield (left)
11 = Limit switch - top not locked at windshield (right)
12 = Limit switch - compartment cover not open
13 = Limit switch - fabric bow not raised
14 = Limit switch - top not lowered into compartment
15 = Limit switch - soft top not up
16 = Limit switch - roll bar not retracted
17 = Limit switch - window not lowered (left)
18 = Limit switch - window not lowered (right)
19 = Illogical vehicle speed signal
20 = Hard top installed and no malfunctions
21 = Power top switch
22 = Roll bar switch
23 = Roll bar control unit
24 = Roll bar automatic deployment has occurred
25 = Illogical limit switch signal
26 = Operational time exceeded
27 = Insufficient voltage
28 = No speedometer signal
29 = No wheel speed signal
30 = Operation blocked (code 19, 28, or 29 are present)

Last edited by bobterry99; 10-21-2002 at 08:02 PM.
Reply With Quote