View Single Post
  #3  
Old 11-24-2011, 12:18 PM
S124300 S124300 is offline
Registered User
 
Join Date: Jul 2011
Posts: 90
To trace a broken wire or dodgy connection you would use the continuity function of a multimeter. Connect one lead to each end of the suspect cable with the circuit switched off and see if the meter's buzzer sounds. No buzzer means no continuity and a break in the wire as long as there are no switches or resistors and diodes in the circuit. It is easier to try this test in short sections between known joints, for obvious reasons.
Sedans are known to suffer harness failure near the boot lid hinge.
The lamp out warning module is behind the instrument cluster if I remember correctly.
Do both lamps use the same fuse?
Reply With Quote