View Single Post
Old 02-01-2012, 11:25 AM
ah-kay ah-kay is offline
Registered User
Join Date: Mar 2009
Location: San Diego
Posts: 2,930
You need to do a few things.

1) a new grommet for the antenna hole
2) use the old antenna bracket for the w201
3) Cut the connector from the old and fabricate a new one for the w201 as the wiring signal is different.
4) I will post the wiring this weekend when I have time.

Good luck.


BTW: I still have the old unit. It was working until one of the plastic gear broke inside. I pulled the gear from a JY with the intention of fixing it. The mask is no good so you need a new mask. You can have it for FREE just reimburse me shipping. Otherwise it goes to the recycling bin. PM me if you want to have it.
Not MBZ nor A/C trained professional but a die-hard DIY and green engineer. Use the info at your own peril. Picked up 2 Infractions because of disagreements. NOW reversed.

W124 Keyless remote, PM for details.

2 x 87 300SDL
1 x 87 300D
1 x 87 300TDT wagon
1 x 83 300D
1 x 84 190D ( 5 sp ) - All R134 converted + keyless entry.

Last edited by ah-kay; 02-01-2012 at 12:11 PM. Reason: typo
Reply With Quote