View Single Post
Old 11-03-2002, 05:29 PM
jchip jchip is offline
Registered User
Join Date: Nov 2001
Location: west orange, NJ
Posts: 47
Rechecked the plug wires using a much better ohmeter and find they are all within spec. However, I checked the resistance of the coil secondary (1&4) and it reads OPEN! Yet I get spark. I'm thinking now that the coil secondary is open but I get spark because the high voltage bridges the gap. Under the demand of high load, the weakened spark is insufficient and thus the miss. Thoughts?
Reply With Quote