View Single Post
Old 11-10-2002, 04:09 PM
Tinker Tinker is offline
Registered User
Join Date: May 2000
Posts: 376
Air flow sensor plate height questions.

Is it permissable to deviate from the factory recommended zero/resting height setting?

The car in question, a 87 16v, was starting great when cold, not so well when hot and stalling when braking after warming up. This was with the zero height set below the factory recommended setting. The hot start problem I attributed to a lack of the recommended 1-2mm clearnance on the control plunger.

If I reset the meter to the factory setting, the car does not want to start.


Reply With Quote