View Single Post
  #2  
Old 11-15-2002, 08:26 PM
engatwork's Avatar
engatwork engatwork is offline
busy
 
Join Date: May 2000
Location: Soperton, Ga. USA
Posts: 11,775
Bear - you should be able to cut the rubber seal all the way around and remove the windshield. Remove the crome trim from the rubber after the winshield is out. Also, during reassembly, put the rubber on the glass and put the chrome back in place then install the windshield. Otherwise, it is easy to bend that trim and it is practically impossible to get it to lay back like it should after it is bent.
__________________
Jim
Reply With Quote