View Single Post
  #17  
Old 05-15-2012, 03:15 AM
Stretch's Avatar
Stretch Stretch is offline
...like a shield of steel
 
Join Date: Sep 2009
Location: Somewhere in the Netherlands
Posts: 14,461
Quote:
Originally Posted by wilburtual View Post
i took the wheel off again, and pushed/pulled on the hub and it seems tight, doesnt move towards or away from the other rear wheel. the bolt seems to be in place as well.
i guess its something actually in the axle? is there any way to grease the parts rather than replacing the whole thing? i sprayed a bunch of DW40 on that joint and was able to drive 5min away from the house to run an errand without the screech , but im sure WD40 wont last long on there...
I think you need to remove the axle to see what's up. Take a look at the link to see if you want to do it yourself or get someone else to do it for you.
__________________
1992 W201 190E 1.8 171,000 km - Daily driver
1981 W123 300D ~ 100,000 miles / 160,000 km - project car stripped to the bone
1965 Land Rover Series 2a Station Wagon CIS recovery therapy!
1961 Volvo PV544 Bare metal rat rod-ish thing

I'm here to chat about cars and to help others - I'm not here "to always be right" like an internet warrior



Don't leave that there - I'll take it to bits!
Reply With Quote