May be able to split it w/ a cold chisel- be careful not to damage the shaft. Once it splits there will be no tension, should slide right off.
I heated a flat screwdriver orange, bent the last 3/8" about 90-100 degrees in a vise and then tempered it (dark cherry, oil quench). This let me pry it off the first 1/8".
Had a puller made by a friend in a sheet metal shop, got it off the rest of the way.
I can mail it if you like, or sketch it out if you have a friend too. I'm in buffalo NY.
__________________
CC: NSA
All things are burning, know this and be released.
82 Benz 240 D, Kuan Yin
12 Ford Escape 4wd
You're four times It's hard to more likely to concentrate on have an accident two things when you're on at the same time. a cell phone.
www.kiva.org It's not like there's anything wrong with feeling good, is there?
|