View Single Post
  #1  
Old 04-21-2000, 06:44 PM
H. O. Tyler
Guest
 
Posts: n/a
I have a 1990 126 with a electrical problem in the fuse box ? I noticed that the high beam would not come on when pulling up on the turn signal switch. I checked the fuse and it was okay. However they started working. So I look very closley at the fuse and replaced it. The high beam worked for a week and again stopped working. They work okay on the lower position, bright to dim. I took my plyers and wiggled the fuse contacts and they started working again and then stop a week later.

Any suggestion Please.


H. O. Tyler
560 SEL
300 SD
240 D
Reply With Quote