View Single Post
  #4  
Old 04-22-2000, 12:05 AM
seriaj55@aol.com
Guest
 
Posts: n/a
Jeff, thanks greatly for the response. The cam turns 2x as fast as the crank, right? So at one 0 degree mark the cam hole won't be in line with the boss, right? Then I would turn the crank 360 degrees which would then line up cam.I'll know better about marking the location of the TDC next time.

thanks again for all your help.

[This message has been edited by Webmaster (edited 04-22-2000).]
Reply With Quote