When a head over heats, it doesn't only bend on the bottom, but also on top were the cam bearings are.
The head should be straightened before machining, otherwise your cans will be forced into a bow.

__________________

76 240 D. Bought in 1998 for $25.
85 300D. Got it for free with a bad engine. ( Sold )
60 Unimog 404. What was left of it, was given to me. Now powerd by 617A.
88 560 SEL. Bought without engine and trans. Now powerd by 617A.
67 250 SE. Cuope. For resto or sale.
64 220SE. For resto.