View Single Post
Old 11-27-2002, 01:30 PM
Posts: n/a
re: 400 SE A/C & heater

Usually I get no responce when I push my "0" or EC button. Today it turned off when "0" button was pushed. Can read sensor values but get the same sensor readings when I try to read the DTC's. Used the values from K6JRF (Great Site!) so not sure if the procedure is the same on my'92. Guess I should put a new kit in my duo valve for the heating problem. Thank you for the help. Need that heater! It gets down to 65 degrees during the winter!
Reply With Quote