View Single Post
Old 04-19-2000, 05:43 PM
chupr98's Avatar
chupr98 chupr98 is offline
Registered User
Join Date: Mar 2000
Location: Vancouver BC
Posts: 134
Hi JEFFSR, thanks for the reply, the head was off because I was getting a very low compression in cylinder 2, also all spark plugs were sprayed with oil(ceramic were not white hot but with some oil spots). New valve guides, seals, 3 angle valve job, head bolts were installed and resurfacing of the the head. Compression is a lot better now (150 psi +/- 5 psi) but oil is still present on the ceremic
Reply With Quote