View Single Post
  #9  
Old 12-04-2002, 08:55 PM
rebootit
Guest
 
Posts: n/a
I have had the same problem this year the couple of times I need heat. Didn't know about the switch, figured the monovalve was bad but now I will try the switch first.
Where are the brushes you ask. Drop the rt side kick panel and then take out the three or four screws holding the blower assembly in place. The motor is right in there and I guess there are two types, one you can fix and one you can't get into. On mine you could see where the brushes were. You bend 2 little tabs up and the brushes pop right out. You will have to cut the wires or desolder them. I found new ones that were very close at the local ACE hardware store. Any alternator or motor rebuild shop should have them as well. Just put them in place, bend the tabs back, and solder the connections.
Reply With Quote