View Single Post
  #9  
Old 10-17-2012, 04:36 PM
Simpler=Better's Avatar
Simpler=Better Simpler=Better is offline
Ham Shanker
 
Join Date: May 2008
Location: Baltimore, MD
Posts: 2,544
Quote:
Originally Posted by WMO Madness View Post
I pulled the bulkhead out and verify the tank, it is not callapsed. I also verified the return liine, it is hooked to the top steel tube. I went ahead and looked at the 300SD, my is hooker the same.


I know this is probably belong to another discussion, but when I was pumping the prime bottom after it got hard and pumped it one more time. some fuel leaked out along the shaft of the plastice tube. Is this normal? Is there somekind of pump (elecetric or mechanical) in the tank or outside the tank that prevent fuel from making it to the engine bay? Thank you for your quick reponse.
You want the updated pump:


They're like $20 here on the forums.
__________________
$60 OM617 Blank Exhaust Flanges
$110 OM606 Blank Exhaust Flanges
No merc at the moment
Reply With Quote