View Single Post
Old 12-03-2012, 08:14 PM
Doktor Bert's Avatar
Doktor Bert Doktor Bert is offline
Das Sturm Uberdoktor
Join Date: Jan 2005
Location: Palm Springs, CA.
Posts: 2,669
Originally Posted by DieselAddict View Post
The OM616/617 engines use Bosch 240/ nozzles that have a crosshole on the side of the tip of the pintle and an exit hole on the tip of the pintle. The OM602/603 engines use Bosch 265 nozzles whose pintles have no holes and they just have a longer tip....
240 Bosch Nozzle on the left and 240 Bosch nozzle on the right.

The pintle on the left is NOT worn down. I have several sets like this, but only the old Bosch 'France' 240 nozzles (on the right) that I bought in 1998 have the extended tip....
Did you just pass my 740 at 200 kmh in a 300SD?????

1978 300SD 'Phil' - 1,315,853 Miles And Counting - 1, 317,885 as of 12/27/2012 - 1,333,000 as of 05/10/2013, 1,337,850 as of July 15, 2013, 1,339,000 as of August 13, 2013

100,000 miles since June 2005 Overhaul - Sold January 25th, 2014 After 1,344,246 Miles & 20 Years of Ownership
Reply With Quote