Quote:
Originally Posted by NC-Diesel
Does anybody happen to know the part# for just the metal and rubber sill the window sits in that attaches it to the regulator? My 81 all four are totally rusted out. Manual regulators though are in superb condition! You don;t have to buy the whole regulator do you? I dug through EPC and could not find a part #for this individual part.
|
I had a scraping clacking noise at one time whenever I raised or lowered my driver side window. Took door apart and found that the channel that the glass sat in had rusted so that it splayed outwards and caught on other stuff on the way up and down.
I happened to have a set of doors off a 123 and was able to swap a good one in. Maybe that is your best bet - look for a parts car without rust that may have a good unit.
Otherwise, it could be that you have to buy the window with the channel attached?
http://home.cogeco.ca/~mbz/300D/channel2.jpg
http://home.cogeco.ca/~mbz/300D/channel3.jpg
__________________
Graham
85 300D
,72 350SL, 98 E320, Outback 2.5