View Single Post
Old 12-10-2002, 09:59 PM
Posts: n/a
thanks again peter, i was still having trouble tonite, and tried a trick i thought might work, the clamp bolt threads into a threaded connector that threads down lower onto the engine, i unscrewed the connector which in turn helped push up on the base of the adjustment plate, it got me about an eight of an inch and now the dist will rotate freely but still wont come off, but with this gap i can now get penetrating oil down where it needs to be, i only had an hour to work on it tonite, so she is soaking in penetrating oil and hopefully things will progress even further tomorrow, hope this tip might help someone else in the future
Reply With Quote