Got it. There is a tan ring inside the igniter that has to be moved to the open position IF you connect the wire before attaching the igniter to the headlight, OR if you remove the igniter from the headlight without first disconnecting the wire connector. You cannot attach the igniter to the headlight assy with the wire connector attached to the Igniter. Once the wire is connected, it moves the ring to the closed position if the igniter is not connected to the headlight assy and bulb. When replacing for the first time, disconnect the wire connection from the igniter before removing the igniter from the headlight. Then, before reattaching the igniter, make sure that the tan ring slots align with the black slots, install igniter, then connect the wire connector.

This was of course after I removed the front bumper pulled the headlights and laid them on the bench to look at it! I am an idiot!!!!!

__________________
Tim

05 E320
86 930
05 Range Rover HSE
95 Range Rover SWB
63 Series IIa
Several boring BMW's for this kids....