Quote:
Originally Posted by BenzDieselTuner
this i find very interesting.....so all i have to do is pull such a unit at the pick and pull yard, and hook up fuel lines and 12 volts + mount it, or is it more complicated than that ??
like i said, highly interesting...
i would like to more...
|
Hello,
The pump is called the HFCM, not the HFCU as I stated earlier.
I found the units cheap and local. I have seen them on ebay for over $400.00 - so you go with what you can find for a reasonable amount of $. If you have access to these cheap then try one. I took mine apart, cleaned it and made sure that the copper leads to the fuel pump on the inside of the pump were making good contact. I am using a length of 5/16" fuel line to connect it to both the supply and return lines. There are four nipples on this unit for main fuel in/out and return in/out.
Google "powerstroke 6.0 hfcm" for more info.
Here is a link to a diagram of the internal components and fuel flow.
275flow3.jpg photo by LowFlying7Three | Photobucket